go-e Charger CORE – with or without installation

Description

go-e Charger CORE – Future-proof and intelligent charging boxgo-e Charger CORE is a smart and modern charging solution with fixed Type 2 charging cable (6 m), designed for the needs of the future. It is easy to install, convenient to use and packed with advanced features that make charging both energy efficient and user-friendly. The charging station supports dynamic charging based on electricity prices and solar energy production and offers integration with third-party systems via open protocols.

Future-proof charging box – ready for V2X and Plug&ChargeThe go-e Charger CORE is future-proof with support for V2X* according to ISO 15118. This includes both Vehicle-to-Grid (V2G) and Vehicle-to-Home (V2H), also known as bidirectional charging. When the technology becomes available, you can use your electric car's battery to power your home or contribute to the stability of the electricity grid. In addition, the charging box is prepared for Plug&Charge technology, which enables automatic identification, authorization and billing when charging - without apps or RFID cards. This makes charging particularly convenient in shared or public places.

Easy management and broad compatibilityGo-e Charger CORE can be connected via WiFi, LTE or Ethernet and is easily controlled with the go-e app or via the upcoming go-e portal. Support for OCPP, MQTT and Modbus TCP enables flexible integration with external systems – e.g. energy management, solar solutions or billing systems.

Features that maximize usability:

• Plug&Charge support
• V2X compatibility*
• Control via app
• Charging optimized for variable electricity prices
• Smooth real-time charging control
• Automatic load balancing
• Built-in DC protection device
• Hours for charging
• Solar cell technology
• Bluetooth connection
• Mobile connection
• RFID
• WiFi and hotspots
• OCPP
• API
• Charging power: 1.4-11/22 kW (depending on 1-phase or 3-phase installation).

**Note: Hardware is prepared – feature will be enabled in a future software update.*

Specifications

Generally:

• Supplier: Go-e
• Delivery item no.:
• EFUEL article no.: E650
• Stationary charging station: According to EN IEC 61851-1:2019
• Dimensions (W x H x D): Approx. 18.6 x 29.7 x 9.9 cm
• Weight (including charging cable) Approx. 5.25 kg
• Mounting method Wall, stand/column
• Charging cable Length 6 m
• Cross section 5 x 6 mm² + 1 x 0.5 mm²
• Mains connection cable (to be specified by the installer)
• Permitted cable area: 3 x 1.5 mm² – 5 x 10 mm²
• Permitted cable diameter: 10 mm – 20 mm
• Wiring options: above | below | behind
• Connection: single or three-phase
• Nominal voltage: 230 V – 240 V (single-phase) / 400 V – 415 V (three-phase)
• Nominal frequency: 50 Hz
• Rated current: 16 A (single-phase/three-phase) 32 A (single-phase/three-phase)
• Network types: TT / TN / IT

Security:

• DC protection device with DC detection and additional AC detection: 6 mA DC, 20 mA AC (On the building side, an RCD type A and a miniature circuit breaker must be installed. Local installation standards must be followed)
• IP55: Protection against dirt and water, for permanent outdoor use
• Protection class: I
• Pollution level: II
• User identification: Can be activated as required. Authentication via RFID or APP possible. 1 taught-in RFID chip included
• Input voltage: Phase and voltage test
• Switching functions: Checking switching functions
• Earthing control: For TT, TN networks (disconnectable earthing control for IT networks – Norgel mode)
• Current sensor: 3-phase
• Temperature sensor: Regulation of charging current in case of overheating

Communication:

• RFID: 13.56MHz
• WiFi: 802.11b/g/n 2.4 GHz / frequency range 2412-2472 Mhz
• Bluetooth: BLE ready (2.4GHz)
• Mobile connection: LTE FDD LTE FDD (B1/3/5/7/8/20) / GPRS / EGPRS (GSM 900MHz/GSM-DCS 1800MHz)
• Ethernet: 10/100 Mbit/s, RJ45 connector, LSA terminals
• Digital input: 2 x non-isolated inputs that can be connected to various equipment, such as a ripple control receiver
• Digital output: 1 x fully isolated break contact to support fault isolation or other legal requirements. 230 V AC / 30 V DC, 5 A
• Network communication: Physical layer in accordance with ISO 15118-3
• API: Open and documented local + cloud HTTP API, Modbus TCP, MQTT
• OCPP 1.6 (Json): Communication with backend systems for intelligent charging and invoicing of transaction costs

Mobile connection:

• Mobile subscription: Minimum 5 years of free mobile connection.
• Possibility of renewal for €12 (incl. VAT) per year.
• Type of SIM card Factory integrated eSIM from go-e (not replaceable).
• Factory-installed and customer-owned nano-SIM for larger B2B projects.
• Activate/deactivate anytime via go-e app or API
• Type of connections Standard: 4G LTE Cat-1
• In case of limited reception: 2G / EDGE
• Country-specific connection availability: Unlimited mobile connection in all EU countries, the UK, Switzerland, Norway and Liechtenstein. Free roaming between these countries
• Mobile networks: An overview of the mobile networks used in the above countries can be found on go-e's website under Support/FAQ.

Charging power and ambient conditions:Maximum charging power: 11 kW (16 A, 3-phase), 3.7 kW (16 A, 1-phase)

Documents, manuals and videos

Product sheetProduct sheet (SE)